1. Mark on all walls from floor level using water level method or Laser method.
2. Fixing of Edge Trim L shaped Angle on the marked level.
3. Insert the anchor in the ceiling at a location of 300mm from the walls and in a span of 1000mm, over the location of main carrier. Then, Hang down 3mm wire hangers with the adjustment clips /8mm threaded rods.
4. Adjust assembled suspension system level to the marked wall trim level in order to receive the Baffles.
5. Open the lock on the carrier to receive the baffles. Make sure the baffle alignments are correct.
6. Baffle splices, carrier splices, carrier end brackets and baffle end caps are available upon request.